EVT-4000e Electric Scooter Service Maintenance Manual -- Acrobat Reader ITEM/PRODUCT DETAILS Those manuals are the same as the manuals used by workshops.

• SERVICE MANUAL SERVICE MANUAL EVT- 4000e EVT- 4000e. • Table of Contents 1. Headlight Assembly 15.

Front Fork 2. Headlight Bulb 16. Rear Shock Absorber 3. Signal Light Bulb 17. Front Brake Hose 4.

Instrument Panel 18. Download metal fight beyblade sub indo mp4. Rear Brake Hose 5.

Speedometer Cable 19. Front Caliper 6. Speedometer Gear 20. • Headlight Assembly Tools Required: Phillips screwdriver Time: Allow 10 minutes for procedure 1.

Release three screws on the handle cover. Release two mounting screws on the instrument panel, and then release three screws on the head light assembly.

Follow with the reversed steps to restore. • Headlight Bulb Tools Required: Phillips Screwdriver Time: Allow 10 minutes for procedure 1. Release three screws on the handle cover.

Release two mounting screws on the instrument panel. Follow with the reversed steps to restore. • Signal Light Bulb Tools Required: Phillips screwdriver; T-bend socket wrench, 8mm Time: Allow 10 minutes for procedure 1. Release three screws on the handle cover. Release signal light bulb set for replacement.

Follow with the reversed steps to restore. • Instrument Panel Tools Required: Phillips screwdriver Time: Allow 10 minutes for procedure 1. Release three screws on the handle cover. Release two mounting screws on the instrument panel. Release the nut for the speedometer. Follow with the reversed steps to restore. • Speedometer Cable Tools Required: Phillips screwdriver Time: Allow 10 minutes for procedure 1.

Release three screws on the handle cover. Release two mounting screws on the instrument panel. Release the nut for the speedometer. Release three screws on the front cover. • Speedometer Gear Tools Required: Box wrench, 17mm Time: Allow 10 minutes for procedure 1. Release front axle nut. Remove the front wheel.

Follow with the reversed steps to restore. • Key Switch Tools Required: Phillips screwdriver; T-bend socket wrenches, 8mm and 10mm Time: Allow 10 minutes for procedure 1. Release three screws on the front cover. Release six screws on the front fender. Release three screws on the glove box. • Horn Tools Required: Phillips screwdriver Time: Allow 10 minutes for procedure 1. Release three screws on the front cover.

Release two connectors on the horn. Release the mounting screws on the horn.

Follow with the reversed steps to restore. • Main Control Cord Tools Required: Phillips screwdriver Time: Allow 10 minutes for procedure 1. Release three screws on the handle cover, two mounting screws on the instrument panel, three screws on the headlight, three screws on the front cover and two screws on the right trim. • Flasher Relay Tools Required: Phillips screwdriver Time: Allow 10 minutes for procedure 1. Release three screws on the handle cover, and remove the rubber sleeve so can see the 2 pin connector for the flasher relay.

Follow with the reversed steps to restore. • DC to DC Converter Tools Required: Phillips screwdriver Time: Allow 10 minutes for procedure 1. Release three screws on the front panel. Release two screws and 4-pin connector for the DC to DC converter. Follow with the reversed steps to restore.

• Left Handle Switch Tools Required: Phillips screwdriver; open-end wrench, 14mm Time: Allow 10 minutes for procedure 1. Remove left rear view mirror and release three screws on the handle cover. Release two mounting screws on the instrument panel.

Release two screws on the left handle switch. • Right Handle Switch Tools Required: Phillips screwdriver; Open-end wrench, 14mm Time: Allow 10 minutes for procedure 1. Remove the right rear mirror and three screws on the handle cover. Release two mounting screws on the instrument panel. Release two screws on the right handle switch and one screw for the throttle cable. • Brake Master Cylinder Tools Required: Phillips screwdriver; Box wrench, 12mm; Hex key wrench, 5mm Time: Allow 10 minutes for procedure 1.

Release three screws on the handle cover, two mounting screws on the instrument panel and three screws on the headlight assembly. • Front Fork Tools Required: Phillips screwdriver; T-bend socket wrench, 8mm; Box wrenches, 14mm and 17mm; Y-bend socket wrench, 12mm Time: Allow 10 minutes for procedure 1. Release three screws on the front cover. Release six screws on the front fender. • Rear Shock Absorber Tools Required: Phillips screwdriver; T-bend socket wrenches, 12mm and 14mm Time: Allow 10 minutes for procedure 1. Release two screws on the trim on each left and right side.

Release two screws on the left shock absorber. • Front Brake Hose Tools Required: Phillips screwdriver; Box wrench, 12mm; diagonal cutting pliers Time: Allow 10 minutes for procedure 1.